Faxing works very well and without problems to most destinations.

I always get fax failures at several points of error,
Unknown transmission phase C error – visible in the tree

I’ve been searching Google for a while, but haven’t found anything relevant yet

The following is the output of the Info/Log message type – SessionTrace (0xFFF)
(I may have tried to only include high quality data; if you need anything else, let me know)

Environment
The modem is a serial MultiTech configured with default settings
HylaFAX™ version 6.0.5
Redhat EL5 – 64-bit

Do you have any ideas on https://formatsphere.com to reduce transmission errors?

VRes support: 7
supports 2DEncoding: yes
supports MMR: yes
aV34Problem: no
aV17Problem: no
supports PostScript: no
supports batch processing: yes
namedBefore: yes
maxPageWidth:2432
maxPageLength:65535
maxSignallingRate:”9600″
minScanlineTime: “20ms”
remoteCSI:”661 222 ****”
remoteNSF:””
Remote DIS: “00 73 51 23 01 A9 01 01 01 04”
send failures: 12
lastSendFailure: “Unknown phase C error while sending”
Sato when dialing a number: 0
paging protocol: “ixo”

25. 23:49:04.36 Jan:: HylaFAX™ Version 6.0.5
Jan 23 23:49:04:36: SEND FAX: JOB 24463 DEST 1661222**** COMMID 000032850 DEVICE ‘/dev/ttyS0’ FROM ‘oracle <[emailprotected]>’ oracle USER < br >
Jan 5 23:49:04.36::<-
January twenty-third 23:49:04.38: : ->
Jan 23 23:49:04.38: DIAL 16612222****
Jan 23 23:49:04.38: `<-
Jan 23 23:49:25.10 :: ->
Jan 20 23:49:26.82 :: ->
Jan 23 23:49:26.82 :: REMOTE CSI “661 222 ****”
Jan 23 23:49:26.82::<-
Jan 7 23:49:26.84 :: ->
Jan 9 23:49:27.26 :: ->
Jan 1 23:49:27.26:: best remote throughput 9600bps
Jan 7 23:49:27.26:: Maximum page width A3 removed (303mm)
January 9, 23:49:27.26: Unlimited maximum length of deleted fan page
Jan 23, 23:49:27.26:: R16 x 15.4 lines/mm, maximum distance
January 13 23:49:27.26 :: REMOTE format support: MH, MR, MMR, JBIG
Jan 23 23:49:27.26 :: REMOTE supports T.30 Annex A, ECM 256 bytes
Jan 23 23:49:27.26 :: 19ms/scan line REMOTE
Jan 23 23:49:27.26 :: USE 9600 bps
Jan 23 23:49:27.26 :: Use error correction mode
Jan 23 23:49:27.26 :: SEND file “docq/doc24463.ps;c1”
Jan 23 23:49:27.26 :: USE A4 page width (215mm)
Jan 13 23:49:27.26 :: USE unlimitedwebsite length
Jan 23 23:49:27.26 :: USE 7.7 lines/mm
Jan 9 23:49:27.26 :: USE MMR 2-D
Jan 23 23:49:27.26 :: USE nothing ms/scanline
Jan 23 23:49:27.26 :: SEND training with v.29 9600bps
Jan 23 23:49:27.26::<-
Jan 23 23:49:27.42: * ->
Jan 23 23:49:27.42::<-
Jan 26 23:49:28.38 :: ->
Jan 12 23:49:28.39 :: <- data
Jan 24 23:49:28.39 :: <- data
Jan 26 23:49:28.41 :: ->
Jan 04 23:49:28.41:: <- data
Jan 04 23:49:28.41:: <- data
Jan 4 23:49:32.98 :: ->
Jan 23 23:49:32.98 :: TRAINING was successful
January 23 23:49:32.98 :: SUBMIT main page
Jan 23 23:49:32.98: : SEND send frame number 0

.
.
.
.
.
Jan 23 23:50:20.53 :: <- Using Data Transfer
Jan 23 23:50:20.53 :: <- hardware
Jan 23 23:50:20.53 :: <- critical information
Jan 23 23:50:22.53 :: <- proof
Jan 23 23:50:22.53 :: <- Search
Jan 23 23:50:22.53 :: <- computer data
Jan 23 23:50:22.53 :: <- computer files
Jan 23 23:50:32.04: : ->
Jan 12 23:50:32.04 :: SUBMIT Final page
Jan 24 23:50:32.04 :: Unknown transmit phase error C
Jan 23 23:50:32.04::<-
Jan 12 23:50:32.12 :: ->
Jan 24 23:50:32.12::<-
Jan 5 23:50:33.09 :: ->
Jan 23 23:50:33.09:: <- data
Jan 23 23:50:33.09:: <- data
Jan 23 23:50:33.48 :: ->
January 23 23:50:34.48:;<-
Jan 23 23:50:35.39 :: ->
Jan 1 23:50:35:39: SESSION: END

I already have a problem with the modem not receiving faxes alternately (I don’t know which one). Try

My shorter faxes should be sent correctly (two World Wide Web faxes). I tried to send a five or six page fax

(via email, two PDF attachments) to two different fax numbers. Both failed with:

Can anyone shed some light on the problem? Modem debugging is connected separately

(their

TR> My attempts to send short faxes are working fine (two pages

TR> faxes). I tried faxing half a dozen pages (by email, two PDFs

TR> attachments) on two different fax tapes. Both failed with:

Only because it has something to do with the PDF->Fax conversion,

You can also call the pdf2fax program hylafax. On my box it’s really about:

James Kloos <***@jhcloos.com> OpenPGP: 0x997A9F17ED7DAEA6

The device is faulty here. It should also have answered “CONNECT”,

Here again, the modem was faulty. “OK” is the wrong answer

AuthOR: Tom Robinson

I have a problem with the modem(s) that receive faxes (I don’t know which one is faulty). Try

My help for sending shorter faxes seems to be correct (duplex fax). I pulled to send six faxes

Can anyone on the search page shed some light on what the problem might be? Modem debugging included (two

Thank you for your letter. Sorry for the long delay in reply. Just got back from a very long weekend

ATI4 RESULT = “OK” REPLY implies “D-Link FM-56SA-SCM V.90,K56Flex”

The material is quite mature. Maybe I should replace it? A recent web search only found one

Position relative to USB modems. I hesitated to buy them. Are there specific recommended USB modems that we

I wanted to explore TTY City right now. This will take a few seconds

So be patient. Please note that in cases where you have not connected a computer,

Categories: Zybooks